www.albanydoors.com
North America
Europe
English (United States)
French North America
Spanish North America
USA, USD
Euro Countries, EUR
Sweden, SEK
Norway, NKR
Great Britain, GBP
Denmark, DKK
Canadian dollar, CAD
©2010 Albany International Corp. – All rights reserved. Any use of this Value Calculation Tool for any purpose not expressly authorized by Albany International Corp. is prohibited.
After the door has completely opened, this is the amount of time that passes before the door begins to close.
Fully loaded (including benefits, etc.) cost of a worker who would use this door
This number will help calculate the labor rate associated with using this door.
Average speed of a forklift or other vehicle that would travel through the door opening
Interior is used where the environments on each side of the door are kept at a constant temperatures and there is a fixed temperature differential
Exterior is used where one side of the door varies with external temperatures
The difference in temperatures in areas on both sides of the door
Select a city from the drop down list that best represents the climate for your door application
Select a city
Atlanta
Baltimore
Boston
Calgary
Chicago
Dallas
Denver
Detroit
Edmonton
Halifax
Indianapolis
Kansas City
Los Angeles
Miami
Minneapolis
Montreal
Nashville
New York
Ottawa
Phoenix
Pittsburg
Quebec City
Raleigh
Saint John
San Francisco
Seattle
St. Johns
Syracuse
Tampa
Toronto
A calculated value that represents a certain number of days with an average temperature below 65.F
A calculated value that represents a certain number of days with an average temperature above 65.F
Cost of cooling units in kWh (kilowatt-hour) for the facility where door will be installed
Cost of typical heating units for the facility where door will be installed
therms
BTU
kwh
galho
ccf
RapidRoll 230 2 spd
RapidRoll 355
RapidRoll 670
ThermaChill & ThermaFreeze
UltraBig
UltraClean
UltraCool
UltraFast
UltraLite
UltraSecure 3000
UltraTough M&I Direct 1 spd
UltraTough M&I Direct 2 spd
After the door has completely opened, this is the amount of time that passes before the door begins to close
This is the average cost for this High Speed Door model. High Speed Doors need less maintenance than conventional overhead doors
High Speed Doors use various actuation devices that greatly decrease, if not eliminate, the number of door impacts from material handling vehicles. If impacted, most Albany doors are self-resetting and require no maintenance while other Albany doors may need minor adjustments
This is the average cost for this High Speed Door model. Albany High Speed Doors are designed for high speeds and high cycles, using a minimal number of parts. Less parts means less maintenance costs and longer door life
The door must be actuated (or automatically triggered to start opening) at a minimum distance from an approaching vehicle in order for that vehicle to past through the door opening without impacting the door. The speed of the door directly affects the minimum distance at which the door needs to start opening
This tool provides an estimation of the total cost of door ownership. There are many other factors such as building position to the wind, air flow and heating and cooling capacity which can affect actual results.
Albany