RapidProtectTM 100

The RapidProtect™ 100 has been especially designed for interior use in the conveyor technique.

The door meets all the requirements needed for a smooth and speedy material flow. It is solely intended for material handling, but not to transport people inside the production halls.

Particularly suitable for:

  • In conveying systems, e.g. conveyor belts
  • In areas of material handling and driverless transport locks
  • For automatic lift and storage systems
  • Partitioning of transport conveyors

X-level

The side frames can be optionally extended exceeding the closing edge of the door by the value X. The value X describes the space between the closing edge of the door and the floor. In case the side frames are extended, the open space below the appliance can be closed of via a Rolltex® fabric panel.

Door material

The side frames are made of galvanized steel.

Door design

Due to its slim side frames the door is suitable for the installation in confined spaces. The 60 mm beams are made of galvanized steel plates, the top roll which carries the door curtain and the bottom profile are made of aluminum.

Door curtain

The door is equipped with a fabric door curtain, available in the colours blue RAL 5010, grey RAL 7035 or red RAL 3002.

A vision panel is available on request.

Curtain level

In cases where the appliance is smaller than the installed door and partitioning of the surrounding area is required it is possible to provide a made-to-measure curtain comprising of different levels. The curtain is cut into shape and strengthened via an aluminum profile.

Safety features

As an option the door can be equipped with a door line photocell and/or an electrical safety contact edge (not according to EN 13241-1). For doors with the contact edge, the clear opening height is reduced by approx. 70 mm.

Motor and top roll cover

As standard the door is provided excluding the motor and top roll cover. As an option a galvanized steel top roll cover is available. A motor cover can also be provided on request. For doors with contactor control or without a control unit a grey plastic cover can be supplied, for frequency converter control units or chain drive units a powdercoated steel housing in the colour RAL 9006 is available.

Motor position

The drive unit is positioned by choice on the right or the left.

On request a chain drive can be supplied for the installation in confined spaces.

Control unit

The door is equipped with a control unit with standard functions in PVC housing.

On request the door can be supplied in combination with a frequency converter, which is positioned at the drive unit or completely without control unit. As an option an additional module for error messages can be supplied.

Return on Investment (ROI) calculator

Calculate the return on your investment to check how quickly you can recoup the purchase cost of an Albany product.

Assess ROI now!

Downloads

To the products overview

Your local contact

Show list