RapidRoll® Clean

Rooms that need to be particularly clean benefit from the use of a RapidRoll® Clean as the speed of opening and closing prevents unwanted air exchange and hence the uncontrolled entry of airborne particles (suitability for clean room applications confirmed by Fraunhofer Institut).

To prevent pressure losses, the cable guide is integrated and access openings inside the door are specially sealed. This product is particularly popular in the medical industry, semiconductor manufacturing and life sciences.

Cleanroom suitability certified by the Fraunhofer Institute

 

  • Fulfils international standards and guidelines for cleanroom applications in accordance with DIN EN ISO 14644-1 and GMP
  • ISO Class 5, GMP Class C
  • Low particle emission
  • Low air exchange thanks to fast opening and closing speed

Door material

The entire door (side frame, motor and roll cover, and bottom profile) is made from stainless steel. The smooth surface facilitates easy cleaning and avoids the accumulation of particle deposits.

Narrow side columns/minimal gap

The dimensions of the door‘s side columns are kept to a minimum and allow the door to be installed in confined areas. The extremely small gap of the door curtain guide ensures minimal pressure loss.

Cable guide sealing

To prevent pressure losses, the cable guide is integrated and access openings inside the door are sealed.

Door curtain

The door curtain consists of PVC with white fabric reinforcement strips.

Fabric reinforcement strips in a wide variety of RAL colours are available as option.

Bottom profile

There is only a small gap between the bottom profile and the side columns. This minimises the pressure loss when the door is closed.

Highest safety standards

The door is equipped with an electrical safety contact edge. A contactless prerunning safety photocell is available as option. In addition the door is equipped with a door line photocell which prevents the door from closing when objects are in the way.

Motor and roll cover

The door is equipped with top roll cover and motor cover as standard.

Frequency inverter control

The MCCVector Control frequency converter control system and the optional UPS battery are located in a compact sealed compartment under the top roll cover.

Drive position

The motor can be fitted either on the right or on the left hand side.

Control unit and main switch

The display unit with its user-friendly foil keypad and graphic display and the main switch are integrated in the side column.

Integrated cable guide

The cables are located in the side columns to provide a smooth surface and avoid surface irregularities that increase particle turbulence. The supply cables of the pre-running safety photocell and the contact strip are guided reliably by an internal cable carrier chain.

Contactless actuator

An optional contactless actuator is available for fast, hygienic opening.

Egress

Self opening is available as an option. The UPS battery supplies power to the door control system in case of a power failure. UPS error and diagnostic messages are indicated by LEDs.

Integrated traffic light in the side columns

It is possible to signal the movement of the door via a traffic light system which can be inserted into either both side columns or just one side column. A yellow flashing light, a stationary red/green light is available or a traffic light in separate stainless steel housing could be installed opposite. A red/ green traffic light with recognition of direction is possible for the option with the MCC control unit.

Return on Investment (ROI) calculator

Calculate the return on your investment to check how quickly you can recoup the purchase cost of an Albany product.

Assess ROI now!

Downloads

To the products overview

Your local contact

Show list